The DiaMon DJ112 is a very compact, high-output, self-powered loudspeaker. It features a 12″ woofer and a co-axial 1.4″ exit compression driver that plays through the center of the woofer, making it a true point-source cabinet. Both the woofer and tweeter coils share the same magnetic structure to keep size and weight to a minimum.
Because the tweeter exits through the middle of the woofer, the extra area that the tweeter would ordinarily take up on the front of the loudspeaker is eliminated, which helps make the DiaMon extremely compact. It’s barely bigger than a 12” woofer but also incorporates a 1.4” exit compression driver with a 3” voice coil. The DiaMon DJ112 includes a 1500-watt class D Powersoft amplifier with built-in digital signal processing, is bi-amped and has a full complement of protections, limiters and equalizers that ensure consistent, accurate and reliable operation. It is fully self-contained and needs no more than power and signal to be ready to go.
Even though the box is very small and very lightweight, there is nothing small or lightweight about its performance. This box is literally packed with the best components and technology money can buy, the whole point of which is to do more with less. The output of this little box is totally out of proportion to its size. It’s extremely loud, but it’s capable of being loud, not struggling to be loud. It sounds much bigger than it looks and has the ability to maintain crystal clarity even at the upper limits of its very remarkable capabilities.
The DiaMon DJ112 is a mid-high loudspeaker, so in order to deliver the BASSMAXX experience with full system sound it’s best to combine it with a very powerful BASSMAXX subwoofer. It has the output to keep up with several subs and for system usage is intended to be mounted on a pole-stand above one or more of the BASSMAXX Profundo Series subwoofers. Used with a subwoofer system, the DiaMon is an extraordinarily size-conscious and yet very powerful main speaker.
The DiaMon DJ112 has a unique angle-cut corner that allows it to be placed on a table and used as a DJ monitor without pole-mounting, freeing up valuable DJ desk real estate. It also has a securely attaching threaded pole-mounting system for when it is used attached to a socket-equipped BASSMAXX subwoofer or on a similarly equipped tripod stand. An adjustable wall-mount bracket is also available for permanent installations.
As a main speaker, the DJ112 can be used with two double 18” subwoofers and easily deliver all the mid-high you need to keep up with them. As a DJ monitor it provides tight, punchy performance and doesn’t distort at high levels. As a live reinforcement speaker, this versatile box provides consistent sound quality over a wide dispersion pattern with excellent resistance to feedback.
|Loudspeaker Description||Single 12″ co-axial, compact bi-amplified, self-powered multi-angle wedge/utility monitor|
|Frequency Response (±3 dB)||60-18,000 Hz|
|Frequency Range (-10 dB)||45-20,000Hz|
|Maximum Sustained Output||123dB SPL, 1m, 2pi, half-space|
|Short-term Peak Output||126 dB|
|Nominal Dispersion (°H x °V)||60 x 60 conical|
|Enclosure Type||Bi-amplified, co-axial, multi-angle, vented wedge|
|Transducer||LF: 1 x 12 ” dia (300 mm) neodymium motor woofer with 3″ (76mm) copper winding voice coil. HF: 3″ diaphragm compression driver on 1.4″ throat concentrically mounted wave guide|
|Amplification||2 x 750W (EIAJ test 1kHz @1%THD)|
|Processing||Integrated comprehensive DSP for HP, LP, EQ and limiting|
|Electrical Connectors||Neutrik Powercon in and through|
|Voltage operating range||95-250V Auto-switching power supply|
|Current Draw, Nominal||95-125V: 3.6A @ 1/8 power, 195V-250V: 2.2A @ 1/8 power|
|Current Draw, Peak||20A|
|Signal Input Connector||XLR-F|
|Signal Output Connector||XLR-M pass-through only|
|Controls||Rotary Level Control with adjustment from Off to +12dB, Push-button Preset Select|
|Cabinet Construction||16mm Baltic Birch plywood. Equipped with 1 handle and a threaded pole socket mount|
|Dimensions (HxWxD)||14 in. x 14 in. x 11.5 in.|
|Net Weight||30.6 lbs (13.9 kg)|
|Shipping Weight||36 lbs (16.3 kg)|
|Exterior Finish||Weatherproof bonded high-pressure polyurethane|
|Grill||Optional CNC waterjet cut 1/8″ aluminum or perf steel|
|Cover||Heavy-duty padded nylon transport cover|
|Support Pole||26″ length and 47″ lengths available|
|Compatible Subwoofers||BASSMAXX Profundo Subwoofer Series|